Aluminum Condenser Collector Pipe

Product Description:

The function of the Aluminum Condenser Collector Pipe in air conditioning: the refrigerant in the air conditioner is compressed by the compressor to generate high-temperature and high-pressure liquefied gas, which is radiated and condensed by the condenser to become a low-temperature and high-pressure liquid, then enters the pipe for collection.

This kind of aluminum condenser collector pipe also can be called aluminum condenser header pipe, it is normally processed by aluminum welding tube.

Product Features:

1. Bright, no corrosion, no oxidation.

2. Straight, no deformation.

3. Strong, tough, have a perfect corner bending at 90 degrees.

4. Neat and smooth cutting section, no burr.

5. High frequency welded, precise in specifications, easy to install.

6. Radiator tubes can be custom-made to meet your special requirements.

Condenser Features:

1. Adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.

2. Fin special treatment to enhance lodging resistance and maintain the tidiness of the products'

appearance
3. Powder coating on the products can enhance corrosion resistance and improve product life

cycle.
4. None- argon arc welding solder products look different.
5. Every product's pressure is maintained by using nitrogen so the product is free from leakage

at 100% before it leaves the factory.

The tech requirements and common dimensions of the Aluminum Condenser Collector Pipe are shown below:

1) Weld width:≤2 mm; Weld line-height≤0.08 mm.

2) Cutting end face angle 90°+/-2, no burrs.

3) The inner and outer surface of the pipe should be clean and free of foreign matter such as oil, dust and aluminum chips; no defects such as crushing or scratching are allowed.

4) Straightness is ≤0.5 mm/500 mm.

5) The length of the pipe, whether the end face is chamfered and the material are in accordance with customer requirements.

http://www.aluminium-tube-pipe.com/